The EVO MFG 2.5" Enforcer Lift Suspension Systems lift your Jeep 2.5's. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The Enforcer kits are specifically designed to lift your Jeep and maintain compliant spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining full wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5" lift shocks. These kits come with a set of 2.5" Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality.
EVO MFG Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37" tires on Rubicon Model JLs or 35" tires on Sahara and Sport/S What are the JL Enforcer OVERLAND Systems, EVO-3012 Kits? The difference with EVO MFG Enforcer Overland systems (EVO-3012s) vs EVO MFG Enforcer systems (EVO-3011s) is the use of front Overland Control Arm Brackets. When lifting your vehicle your control arms at ride height have a steeper angle towardsthe floor which can have some negative effect/chop in ride quality.With the use of the included Overland Control Arm brackets we relocate the front control arm mounting locations at the frame. In doing this when lifted we maintain factory flatter control arm angles and while minimal, we alleviate much ofthe chop associated with lifting a Jeep giving even better and moreimproved ride quality.
Also, in the use of Overland Drop Brackets we can engineer more performance into the front suspension to improvebraking and driveline angles through suspension cycle. Both kits drive very well, the Overland Kits are better suited for less hard-off-road crawling and more light off road and on road use. The EVO MFG 2.5" JL Enforcer Overland Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation. 2.5" lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.
Stage 1kits includes all the necessary parts to lift your JL 2.5's.
Stage 2kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment
Stage 4kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
*All part number "EXT" kits include front and rear shock extensions.Retaining factory shocks while maintaining full wheel travel
Note:Depending on actual tire variances and sizes, some minor factoryinner liner plastic may need to trimmed/removed to fully clear some tiresunder compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with PLUS "P" kits.