The EVO MFG 2.5" JLU High Clearance Long Arm kit will like your JLU2.5's. Through specificallydesigned bracketry we accomplish theultimate in suspension and chassisclearance, larger wheel travelability, optimal suspension geometry withincreased ride quality.Clearance, ride quality, performance and ease of installation wasourfocus in creating this long arm suspension system. The front armsmounttucked up inside nearly flush with the bottom of the framemountinginches above the stock front lower mounting bracket. The rearmountinglocations for the long arm are on the side of the frame, abovethebottom giving inches of clearance over the factory locations aswell.Keeping optimal geometry while maintaining as much clearancewascritical in the design of this system. In doing so, not only didweraise the rear control above the frame, but we raised its mounting attherear axle by multiple inches as well.
This allows for anincredibleground clearance increase but just as importantly retainingflat andoptimal control arm angles giving ideal ground clearance,smooth ridequality and long travel ability. The mounting brackets arespecifically designed to require no exhaustcutting on 3.6L Jeep
Wrangler JLU 's (minor grind/clearance to flangerequired) and have fulllength hard-face mounting surfaces that weld toyour frame givingredundant and ample welding area and strength to theirmounting. Themounting brackets align to the frame simply usingexisting factory holesgiving complete assurance of proper locatingduring install. Simplybolt brackets up to frame with existing hardwareand weld them in place.These kits come with a set of 2.5" Plush Ride Lift springs specific to
each corner which will keep the Jeep Wrangler JLU more level side toside and will maintain a unique and compliant ride quality. EVO MFG LongArm joints feature Johnny Joints on both ends of thecontrol arms forrestriction free articulation and motion with nowearable and limitedbond rubber.All EVO MFG lower long arms are built with strength in mind.
These arms aremade from industry leading 2.0" x .281" wall Steel DOMTubing. Includein these kits is front brakeline extension brackets, Rear swaybarendlinks and front and bumpstop extensions. Cutting, grinding andwelding of frame brackets required. The EVO MFG 2.5" High ClearanceLong Arm kits require no driveshaft or exhaust modifications (your shockchoice may require this, contact manufacturer to be sure). Option ofretaining factory shocks, maintaining wheel travel with use of shockextensions (part number EXT kits) or without shock extensions to allowfor use of your choice of aftermarket 2/2.5" lift shocks. EVO3015K kitscome with EVO SPEC King 2.5" Remote Reservoir shocks all 4 corners. EVOMFG JL 2.5" High Clearance Long Arm Kits will fit up to a 37" tires onRubicon Model JLUs or 35" tires on Sahara and Sport/S (Larger tiresclearance with aftermarket fenders or trimmed factory fenders). 2.5"lift is based on increase of a 4 Door Rubicon. 4 Door Sport and SaharaModels will see slightly higher increases over stock and will matchoverall lift height of a Rubicon Model.
Note:Depending on actual tire variances and sizes, some minorfactoryinner liner plastic may need to trim/removed to fully clearsome tiresunder compression. These kits require wheel spacers oraftermarket wheels with smaller backspacing.
Front and rear adjustable trackbars are included with PLUS "P" kits
Front aftermarket driveshaft is not required when equipped with EVO Spec King Shocks
