T he
EVO MFG 4.5" JL Enforcer Lift Suspension Systems lift your 2018+ Jeep
Wrangler JL 4.5"s. Our main goal in developing this kit was to give a
smooth ride on and off road while giving additional lift with increased
performance. The JL Enforcer kits are specifically designed to lift your
JL and maintain compliant spring rate, smooth ride quality with the use of
your choice of aftermarket 4.5" lift shocks. These kits come with a set of
4.5" Plush Ride Lift springs specific to each corner which will keep the
Jeep Wrangler JL Level side to side and will maintain a unique and compliant
ride quality. EVO MFG JL Enforcer kits are available in multiple configurations
to suit your needs and budget and are up gradable down the road. These Enforcer
kits will fit up to a 38+" tires on Rubicon Model JLs or 36+" tires
on Sahara and Sport/S (some trimming or bump stop adjustment may be required to
clear larger sizes)
The EVO MFG 4.5" JL Enforcer Kits are easy to install
using normal tools. No drilling or cutting (optional rear shock extensions
require one minor drill). They require no driveshaft or exhaust modifications
(your shock choice may require this, contact manufacturer to be sure). Simple
Bolt on installation.
4.5" lift is based on increase of a 4 Door
Rubicon. 4 Door Sport and Sahara Models will see slightly higher
increases over stock and will match overall lift height of a Rubicon
Model. 2 Door Models (all) will see slightly higher increases in
lift. Increases will vary across all models and equipment.
The difference with EVO MFG Enforcer Overland systems vs EVO
MFG Enforcer systems is the use of front Overland Control Arm Brackets.
When lifting your vehicle your control arms at ride height have a steeper angle
towards the floor which can have some negative effect/chop in ride
quality. With the use of the included Overland Control Arm brackets
we relocate the front control arm mounting locations at the frame. In
doing this when lifted we maintain factory flatter control arm angles and while
minimal, we alleviate much of the chop associated with lifting a Jeep
giving even better and more improved ride quality. Also, in the use
of Overland Drop Brackets we are able to engineer more performance into the
front suspension to improve braking and driveline angles through
suspension cycle. Both kits drive very well, the Overland Kits are better
suited for less hard off-road crawling and more light off road and on road use.
Stage 1 kits includes all the minimum necessary parts to lift your JL
4.5"s. (Upgrade kit only, not complete for 4.5" lift)
Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment
Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
Extended aftermarket shocks are required on 3.5" Lift
Kits and may or may be include with selected kits.
* "K" kits include a set of EVO SPEC
King 2.5" Remote Reservoir King Shocks
* "K2" Kits include a set of EVO
SPEC King 2.0 Smooth Body Shocks
* "BIL" Kits include a set of
Bilstein 5100 Shocks.
Front aftermarket driveshaft is not required when equipped
with grouped shocks above.
*Front and rear adjustable trackbars are
included with PLUS "P" kits. Required on 4.5" Kits
Note: Depending on actual tire variances and
sizes, Some minor factory inner liner plastic/fender may need to
trimmed/removed to fully clear some tires under compression.
Backspacing adjustments and/our aftermarket wheels with smaller backspacing is
required.
