The Rock Krawler JL 3.5 T-Rex Systems are for those JL 2 Door Owners looking to get the best off-road ability without modifying the fuel system. It features a X Factor mid arm front suspension system combined with a X Factor long arm rear system. The rear system provides the tried and true independent 3 link conversion with X2 rear suspension geometry. New high clearance axle mounts provide 3.5 inches of ground clearance under the rear axle as compared to stock. Rear upper shock relocation brackets ensure you do not lose any shock travel. The combination of high clearance mid arm front suspension and high clearance rear long arm suspension makes your 2 Door JL tough to beat on the trails. And if the day ever comes where you want to modify the fuel system and go full long arm suspension, you have that option.
System Benefits:
System Includes:
Tire Fitment:Sport and Sahara with Full OEM Fenders37" Tall Tires (3" Bump Stop Height Recommended)Sport and Sahara with Trimmed or High Lined OEM Fenders38" Tall Tires (3" Bump Stop Height Recommended)Rubicon with Full OEM Fenders37"/38" Tall Tires (3" Bump Stop Height Recommended)Rubicon with Trimmed or High Lined OEM Fenders40" Tall Tires (3" Bump Stop Height Recommended)
Wheel Fitment:Sport and Sahara Wheel Fitment Recommendations37"/38" Tall Tires -Recommend 3.5" of Back SpacingRubicon Fitment Recommendations35" Tall Tires -Recommend 4.5" of Back Spacing37" Tall Tires -Recommend 4.5" of Back Spacing40" Tall Tires -Recommend 3.5" of Back Spacing
Shock Notes:Generic Front Shock Length -17" Collapsed/ 29.5" Maximum ExtendedGeneric Rear Shock Length -18" Collapsed/ 30.5inMaximum Extended
General Notes:*All lift heights based on Sport Models For 2 Doors*Recommend a new front C.V. driveshaft for all front shocks with max. extended length greater than 29in*Requires welding of the Rear Long Arm Mounts*Requires removal of the OEM frame rear control arm mounts*Requires removal of the OEM axle side rear lower control arm and track bar mounts*Requires modifying the OEM rear shock mounts and welding of the raised rear upper shock mounts*Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up