1. Home
  2. Suspension
  3. Shocks
  4. Shocks
  5. Rock Krawler 3.5in T-Rex No Limits Coilover Long Arm System Lift Kit -JL 2dr

Rock Krawler 3.5in T-Rex No Limits Coilover Long Arm System Lift Kit -JL 2dr

Write a Review
On sale: $7,889.98 $6,706.48
Part Number: JL35TXNL-2CS
Free Shipping on orders over $70

The Rock Krawler JL 3.5 T-Rex No Limits Coil Over Systems are for those 2 Door JL owners looking to get the best off road ability without modifying the fuel system. It features a X Factor mid arm front suspension system combined with a X Factor long arm rear system. The rear system provides the tried and true independent 3 link conversion with X2 rear suspension geometry. New X2 high clearance axle mounts provide 3.5 inches of ground clearance under the rear axle as compared to stock. Rear upper shock relocation brackets ensure you do not lose any shock travel. The combination of high clearance mid arm front suspension and high clearance rear long arm suspension makes your 2 Door JL tough to beat on the trails. And if the day ever comes where you want to modify the fuel system and go full long arm suspension, you have that option.

System Benefits:

  • 2.625" Remote Reservoir Coil Over Front
  • 2.625" Remote Reservoir Shock Rear
  • Use factory sway bar disconnect
  • Excellent Highway Ride
  • Improved Off-Road Ability
  • Triple Rate Rear Coil Springs
  • Rear Spring Leveling Pads
  • Lifetime Warranty on All Hard Parts
  • Upgradeable to Rock Krawler Full JL Long Arm
  • Jeep remains level on all 4 corners

System Includes:

  • (2) 2.625" remote reservoir front coil overs
  • (2) 2.625" remote reservoir rear shocks
  • (2) Frame side coil over mounts
  • (2) Axle side coil over mounts
  • (1) Adjustable front Anti-wobble trac bar
  • (2) X Factor adjustable front lower mid arms
  • (2) Adjustable front upper mid arms
  • (2) No Limits sway bar links
  • (2) Triple rate rear coil springs
  • (2) Rear spring correction seats
  • (2) Weld-on frame side rear long arm mounts
  • (2) X Factor adjustable rear long arms
  • (1) Rear upper frame mount
  • (1) Adjustable rear upper control arm
  • (2) Rear extended sway bar links
  • (1) Adjustable rear track bar
  • (2) Rear upper shock mount
  • (2) Weld-on rear axle side control arm mount
  • (1) Weld-on rear track bar mount
  • (1) Weld-on rear truss
  • (2) Rear brake line relocation bracket

Tire Fitment:

  • Sport and Sahara with Full OEM Fenders
    • 37" Tall Tires (3" Bump Stop Height Recommended)
  • Sport and Sahara with Trimmed or High Lined OEM Fenders
    • 38" Tall Tires (3" Bump Stop Height Recommended)
  • Rubicon with Full OEM Fenders
    • 37"/38" Tall Tires (3" Bump Stop Height Recommended)
  • Rubicon with Trimmed or High Lined OEM Fenders
    • 40" Tall Tires (3" Bump Stop Height Recommended)

Wheel Fitment:
Sport and Sahara Wheel Fitment Recommendations

  • 37"/38" Tall Tires -Recommend 3.5" of Back Spacing

Rubicon Fitment Recommendations

  • 35" Tall Tires -Recommend 4.5" of Backspacing
  • 37" Tall Tires -Recommend 4.5" of Backspacing
  • 40" Tall Tires -Recommend 3.5" of Backspacing

Shock Notes:
Generic Front Shock Length -17" Collapsed/ 29.5" Maximum Extended
Generic Rear Shock Length -18" Collapsed/ 30.5inMaximum Extended

General Notes:
*All lift heights based on Sport Models For 2 Doors
*Recommend a new front C.V. driveshaft for all front shocks with max. extended length greater than 29in
*Requires welding of the Rear Long Arm Mounts
*Requires removal of the OEM frame rear control arm mounts
*Requires removal of the OEM axle side rear lower control arm and track bar mounts
*Requires modifying the OEM rear shock mounts and welding of the raised rear upper shock mounts
*Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up
*Requires removal of the OEM shock mount off the frame
*Requires removal of the OEM shock and spring mount off the axle
*Requires welding of the new coil over mount on the axle only

Recently Viewed Items