The RockJock Antirock sway bar kit for Jeeps ensures front and rear suspension balance in rugged off-road conditions. The sway bar kit provides the driver with increased traction by balancing and distributing vehicle weight and distributing traction over all four tires. The Antirock off-road sway bar is designed to directly replace the stock Jeep sway bar. This sway bar kit is made of SAE 4130, heat-treated steel for ultimate strength. The kit includes all necessary components for installation including, steel sway bar and bolt-on billet aluminum frame brackets. The brackets are milled with the RJ logo into the sides and are semi-gloss black powder coat finished. The kit also includes Delrin bushings, semi-gloss black powder-coated arms, adjustable length Heim jointed sway bar links, installation hardware, and step-by-step instructions. The sway bar unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicle's axle housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. When the AntiRock sway bar kit is installed, Jeeps will have increased body roll than with the stock parts. This sway bar may be used on the street, however, it will not provide the same performance as the stock setup.
