1. Home
  2. Drivetrain
  3. Axles
  4. Complete Axle Sets
  5. Teraflex Wide Front Tera44 HD Axle w/4.56 R&P and ARB Locker, 4-6 in Lift - JK

Teraflex Wide Front Tera44 HD Axle w/4.56 R&P and ARB Locker, 4-6 in Lift - JK

Write a Review
Your Price: $4,451.99
Part Number: 35434564
Free Shipping on orders over $70

TeraFlex Front Tera44 TF44 Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as OEM Rubicon locker, choice of Spicer ring & pinion gear ratio, Spicer bearings and install kits, TeraFlex heavy-duty ball joints, and factory yoke.

Simply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housings a true DIY process!

These heavy-duty JK/JKU Front Tera44 R44 Rubicon Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler/JKU Wrangler Unlimited models including Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK/JKU owners looking to beef up the front axle 's weak areas.

LIFT HEIGHT: 4-6"

WIDTH: 70" WMS-WMS (wide)

AXLE TUBE: 3.25" x 0.5"

RING & PINION: 4.56

Includes:

  • ARB air locker
  • Spicer ring & pinion - 4.56
  • Spicer bearings & install kits
  • TeraFlex HD ball joints
  • Factory yoke

Features & Benefits:

* 3.25 O.D. x 0.5" wall extreme duty axle tube increases strength to resist bending & torsion

* Pre-installed inner axle seals

* Forged HD inner knuckles w/ greater upper & lower section strength

* Ductile cast iron housing w/ increased rib gussets

* HD ductile iron differential cover

* Asymmetric housing design, for extra-long tube side strength

* Smooth radius bottom design to glide over rocks & obstacles

* Integrated lower flexarm skid plates

* Bottom oil drain hole for simple fluid changes

* Premium UV protected triple-stage powder coat process for superior corrosion resistance

* 1/4"-thick CNC laser cut axle brackets for extreme strength

* Integrated factory location upper control arm mount

* Pre-installed upper control arm bushings

* Reinforced front track bar mount (ties into spring pad) for greater strength

* Proper pinion angle for lifted JK applications

* Pre-tapped hole on spring perch for bump stop extensions

* Pre-drilled holes for limit straps & lower spring retainers

* Retains all JK/JKU ESP, ABS, & speedometer sensor capability

* 100% engineered, designed, & built in the USA

* 100% new components

* 1-Year / Unlimited Mileage Warranty

Note:

  • The TF44 axle is designed to work with non-Rubicon Dana 44 lockers. Please consult the Tera44 axle flow chart prior to placing your order.

Requirements & Recommendations:

  • Below is a list of Requirements & Recommendations for TeraFlex axle housings as budget and build preference allows.
  • Questions? Stop scratching your head and contact us! We know our axles AND we're here to help!

CONTROL ARM UPGRADE

  • 4-6" LIFT: This much lift REQUIRES adjustable flexarms for caster angle adjustments.
  • Front upper (# 1415520) & front lower (# 1415500) TeraFlex Adjustable Alpine Flexarms will work w/ 2.5-4" lifts.
  • Front upper (# 1315520) & front lower (# 1315500) TeraFlex Adjustable Alpine Long Flexarms will work w/ 3-6" lifts.

INNER AXLE SHAFT UPGRADE

  • 0-6" LIFT: REQUIRES aftermarket inner axle shafts to handle the additional power. TeraFlex offers 34.19" passenger side axles (# 304136) & 19.11" driver side axles (# 304120). These shafts MUST be used w/ 2013-2017 JK axle U-joint.

AXLE STUB UPGRADE

* 0-6" LIFT: High-quality aftermarket chromoly stubs are recommended, though the stock 2013-2017 JK/JKU outer axle stubs can be (re)used.

AXLE SHAFT TUBE SEAL UPGRADE

* 0-6" LIFT: Get serious with HD 0.5" wall seals (# 4354050) or keep it real with standard 0.25" wall seals (# 4354025). Stock seals may also be reused.

STEERING SYSTEM UPGRADE

* 4-6" LIFT: Get the optimal set up w/ the Complete High Steer System w/ HD Tie Rod & Drag Link Flip Kit (# 4391000) or save a little w/ the HD Tie Rod & Flipped Drag Link Kit (# 1853905). For tighter budgets, the High Steer Knuckle Kit (# 4390879) will provide the necessary steer height w/ your stock steering components. The factory steering system may also be reused.

BRAKE UPGRADE

* 0-6" LIFT: Experience a notable difference w/ a TeraFlex Big Brake Kit (# 4303400 or # 4303420) or Big Rotor Kit (# 4303480 or # 4303490).

Recently Viewed Items

TOP