Home > Dynatrac >

Dynatrac JK 2007-15, Progrip Performance Brake System - JK44-2X1125-A
Dynatrac JK 2007-15, Progrip Performance Brake System - JK44-2X1125-A


 
Our Price: $1,095.00


Product Code: JK44-2X1125-A
Qty:

Description
 

Dynatrac™ is setting a new standard in brake upgrades for the Jeep Wrangler JK with the introduction of its ProGrip™ Brake System, designed to provide a significant braking improvement during off-roading and daily-driving experiences as well as in emergency stops.
The Dynatrac ProGrip Brake System comes with larger rotors for the front and rear, providing improved braking by moving the factory calipers farther from the axle centerline. The increased rear braking power provides balanced braking, reducing nose dive and dramatically improving the control of the vehicle in mild and hard braking conditions compared to upgrades that only address the front brakes. Significant research was done to select the optimum front and rear brake-pad linings to balance the system and provide additional stopping power.
Fully instrumented testing showed lower brake pedal pressure and a reduction in stopping distances of up to 30 percent compared to stock brakes on a Jeep JK outfitted with a 4-inch lift and 37-inch-tall tires. Measured G-force during moderate braking (1,000-psi brake fluid pressure) increased from 0.48 Gs with stock brakes to 0.63 Gs with the Dynatrac ProGrip system.
Another key advantage is that installation of the system does not require opening the brake hydraulics, thus avoiding the chore of bleeding the brakes after installation. Additionally, brake pedal feel and travel is improved after upgrading to the Dynatrac ProGrip Brake System.
The Dynatrac ProGrip Brake System fits Jeep Wranglers with 17-inch wheels (wheel spacers are required with 17-inch factory wheels), and the system will fit in nearly all aftermarket wheels without spacers.

The Dynatrac ProGrip Performance Brake System includes:
* 13.50-inch front rotors with unique pillar-vented cooling design
* 14.25-inch rear rotors with integral parking brake surface
* Stronger caliper brackets designed using CAD/FEA and advanced engineering tools
* Unique front and rear brake pads for optimum friction performance
* Part Number: JK44-2X1125-A


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Dynatrac